You are here: Home / People / Faculty Directory / Mo Hosni

Mo Hosni     (Schedule)

Professor

Education:

Ph.D., Mechanical Engineering, Mississippi State University, 1989

M.S., Mechanical Engineering, Louisiana State University, 1984

B.S., Mechanical Engineering, Southern University, 1981

 

Academic Experience:

Kansas State University, Professor, Big-12 Engineering Consortium Director, 2009-present

Kansas State University, Professor and Department Head, Mechanical and Nuclear Engineering, 2001-2009

Kansas State University, Professor, Mechanical and Nuclear Engineering, 1999-present

Kansas State University, Director, Institute for Environmental Research,1993-2001

Kansas State University, Associate Professor, Mechanical and Nuclear Engineering, 1994-1999

Kansas State University, Assistant Professor, Mechanical Engineering, 1991-1994

 

Non-Academic Experience:

Coast Machinery, Consultant, Baton Rouge, LA, 1985-1986

 

Certifications or Professional Registrations:

Management and Leadership in Education, Management Development Program (MDP), Harvard Graduate School of Education, Harvard University, 2006

Mediation and Conflict Resolution, Kansas State University, 2001

Fundamentals of Engineering (FE), Louisiana, 1982

 

Current Membership in Professional Organizations:

American Society of Heating, Refrigerating and Air-Conditioning Engineers, Fellow

American Society of Mechanical Engineers, Fellow

American Society for Engineering Education, Member

Tau Alpha Pi, Member

Tau Beta Pi, Member

Sigma Xi, Member

 

Honors and Awards:

Dedicated Service Award, American Society of Mechanical Engineers, 2008

Presidential Outstanding Department Head Award, Kansas State University, 2005

Distinguished Lecturer, American Society of Heating, Refrigerating, Air-Conditioning Engineers Distinguished Lecturer Program, 2005-2008

Fellow, American Society of Heating, Refrigerating, Air-Conditioning Engineers, 2005

Best Symposium Paper Award, American Society of Heating, Refrigerating, Air-Conditioning Engineers, 2004

Distinguished Fellow, Bagley College of Engineering, Mississippi State University, 2004

Distinguish Service Award, American Society of Heating, Refrigerating, Air-Conditioning Engineers, 2003

Fellow, American Society of Mechanical Engineers, 2002

Research Excellence Award, College of Engineering, Kansas State University, 2001

Best Symposium Paper Award, American Society of Heating, Refrigerating, Air-Conditioning Engineers, 1999

Myers-Alford Teaching Excellence Award, College of Engineering, K-State, 1997

Faculty Advisor of the Year Award, Region VII, American Society of Mechanical Engineers, 1995

 

Service Activities:

Commissioner, EAC, ABET

Sub-Committee Chair, Committee on Engineering Accreditation (CEA), ASME

Division Chair, Fluids Engineering Division, ASME

Member, Board on Codes & Standards, ASME

Co-Chair, SCP 203, Method of Test for Determining Heat Gain of Office Equipment Used in Buildings. ASHRAE

Member & H&A Chair, Technical Committee 5.3, Room Air Distribution, ASHRAE

Member, Community Advisory Board, Reilly County Police Department, Manhattan, Kansas

Member, Undergraduate Committee, Mechanical and Nuclear Engineering Department, K-State

Member, Reactor Safeguard Committee, Mechanical and Nuclear Engineering Department, K-State

 

Most Important Publications and Presentations From the Past Five Years:

Beneke, J., Jones, B. w., and Hosni, M.H., “Fine Particle Dispersion in a Commercial Aircraft Cabin,” ASHRAE Journal 2011.

Ebrahimi, K., Zheng, Z., and Hosni, M.H., “LES and RANS Simulation of Turbulent Airflow and Tracer Gas Injection in a Generic Aircraft Cabin Model,” Proceedings of the 3rd Joint US-European Fluids Engineering Summer Meeting, Montreal, CA, 2010.

Jokar, A., Eckels, S. J. and Hosni, M. H., “Single Phase Flow in Mesochannel Compact Heat Exchangers for Air Conditioning Applications,” Heat Transfer Engineering Journal, Volume 30 (14), 2009.

Jokar, A., Hosni, M. H., and Eckels, S. J., “Dimensional Analysis for the Evaporation and Condensation of Refrigerant R-134a in Minichannel Plate Heat Exchangers,” Applied Thermal Engineering, Vol 26 (17-18): 2455-2494, 2006.

Lebbin, P.A., Hosni, M.H., Jones, B.W., Beck, B.T., Lin, C.H., and Horstman, R.H., "Comparison of SPIV Measurements for Different Test Room Air Inlet Configurations with the Same Inlet Reynolds Number," ASHRAE Transactions, Vol. 112(1), 2006.

Most Recent Professional Development Activities:

ABET Workshops, ASME Leadership Training Workshops